Features
P2160
Is a high-quality power amplifier without size, weight, and cooling problems.
Features
P2160
Is a high-quality power amplifier without size, weight, and cooling problems.
80W + 80W (into 8 ohm).
It weighs only 10.5 kg (just over 23 lbs). Also, it's priced so that it won't break your bank balance.
Balanced connections
XLR and 1/4" phone.
Bridged mode
250W into 8 ohm.
Decibel-calibrated attenuation controls
Protection circuit
It is automatically activated when switched on, the output is muted for about 6 seconds, protecting your speakers (and ears) from power-on "thumps".
Front panel LED
It informs you of the status of the protection circuit.
This amplifier has:
Professional specifications, professional features as well as professional reliability.
It is a lower-power amplifier
Which does not compromise on features, quality, or reliability.
Technology
Audio & Video
Specs
Specifications
| Power Output Level | Stereo: 80W + 80W; RL = 8 ohms, f=20 Hz-20 kHz, THD | |
|---|---|---|
| Frequency Response | 0 dB +/- 1.0 dB; f=10Hz-50 kHz, RL=8 ohms, Po=1 W | |
| Power Bandwidth | Stereo: 10 Hz-40 kHz; Po= 40 W, RL= 8 ohms, THD= 0.1% 10 Hz- 40 kHz; Po= 63W, RL=4 ohms, THD= 0.1% Mono: 10Hz-40 kHz; Po=125W RL= 8 ohms. THD=0.1% | |
| Total Harmonic Distortion (THD) | Stereo: | |
| Intermodulation Distortion | Stereo: | |
| Channel Separation | ATT max, Input 600 ohms shunt >/=68 dB; Po=40W, RL=8 ohms, f=20 Hz-20 kHz | |
| Residual Noise | - | |
CD Player
| Signal-to-Noise Ratio | >/=100 dB; Input 600 ohms shunt, fc=12.7 kHz- 6 dB/oct LPF >/=105 dB; Input 600 ohms shunt, IHF-A network. | |
|---|---|---|
Specifications
| Damping Factor | > 100; RL=8 ohms, f=1 kHz | |
|---|---|---|
| Slew Rate | +/-30 V/ mm sec; Stereo, RL=8 ohms, Full swing +/-50 V/mm sec; Mono, RL= 8 ohms, Full Swing. | |
| Sensitivity | +4 dBm; Po=80 W, 8 ohms, ATT max, f= 1 kHz | |
| Voltage Gain | 26.3 dB; ATT max, f=1 kHz, RL= 8 ohms | |
| Input Impedance | >/= 15 kohms; Balance or Unbalance, ATT max | |
| Indicators | Power Red LED; turns on when Power is On Protection Red LED; turns on when protection or muting is on Clipping Red LED; turns on when THD >/=1% Signal Green LED; turns on when Signal output above 2 Vr.m.s., (means 1 W. 4 ohms) (20 Hz-20 kHz) | |
| Protection Circuits | Output Muting 6 sec. +/-2 sec.; after power is on DC sense Dc +/- 2 V; output shut off Thermal >/=85 deg. C; heat sink temp. PC Limiter RL | |
| Controls | Front Power Switch; push on/ push off Input Attenuator; 31-position Rear Mode Switch; Stereo / Mono (BTL) | |
| Power Requirements | U.S. and Canadian Models; 120 V, 60 Hz General Model; 220/240 V, 50/60 Hz British Model; 240 V, 50 Hz. | |
| Power Consumption | U.S. Model; 250 W Canadian Model; 250 W/350 VA General Model; 250 W British Model; 250 W | |
| Dimensions | (W x H x D) 480 x 98 x 398 mm (18-7/8" x 3-7/8" x 15-11/16") | |
| Weight | 10.5 kg (23 lbs. 2 oz) | |
P Series Power Amplifiers [English / 245KB]
