P3500

Operating in the stereo mode the P3500 delivers 350 watts per channel into 8 OHMS, 20 Hz to 20 kHz with less than 0.1% THD. It is designed for safe, stable operation into low-impedance loads. Maximum power output is a substantial 500 watts into 4 OHM loads.

It can be configured for BTL monaural operation by simply flipping a rear panel switch. In the bridged mono mode the P3500 pumps out 1000 watts.

On the rear panel three types of input connectors are provided for maximum versatility: phone jacks, XLR type connectors, and barrier strips that provide maximum reliability in permanent installations.

Power-on muting isolates the speaker outputs for approximately 6 seconds after the power is turned on. DC sensing circuitry shuts off the outputs if a DC voltage greater than +/- 2 volts is detected at the output terminals. Thermal protection shuts down the system if the heat sink temperature exceeds 100deg. C, and a power limiter reduces power output if improper connections or accidental shorts result in a speaker-terminal load of less than 2 ohms.

The P-series lineup is "3U" in height, taking up a small amount of rack space . An internal thermostatically-controlled 2-speed cooling fan eliminates the need for external cooling.

The input attenuators features 41 sure detents and smooth, noise-free control.

Signal and Clip indicators are found on each channel. The signal indicators let you know when there is a signal present in the corresponding channel. The CLIP indicators warn that total harmonic distortion has exceeded 1%.