MC1602

Electronically balanced inputs, allowing both Hi-Z phone jacks and Lo-Z XLR inputs for both line and mic level input sources.

In addition to the continuously variable gain control, a 20dB Pad can be switched in to accomodate even the hottest input signals.

A single TRS phone jack (tip is output, ring is input, sleeve is ground), allows you to connect a signal processing device to any input desired.

Three independant Aux Sends are included to provide for stage monitors and multiple effects, as well as other uses.

By changing Internal Jumpers, the three Aux Sends can be selected to be either pre or post EQ, and additional jumpers can independently place each Aux Send pre or post fader.

Each Master Aux Send Control can easily adjust the overall level of the signals from the input channel Aux Send to correctly drive an effects device or power amp.

Two Stereo Aux Returns can be used with effects devices or as tape inputs.

By pressing any Cue Switch, the operator can listen to the pre fader signal of any input channel, Aux Send or the Stereo outputs via the Cue/Phones level control and headphones jack.

The three illuminated VU Meters, with red LED peak indicators light when the output signal reaches +14dB. The Stereo Left and Right output meters show the level of the Stereo mix, while the Aux/Cue meter can be switched to monitor, Aux Sends 1-3 or the Cue signal (pre-fader level of the input, Aux Send or Stereo output being monitored by the Cue switch).

The Talkback Mic allows the operator to speak over any one of the Aux outputs or the main Stereo mix.

Includes +48 volt Phantom Power for powering condensor microphones and direct boxes.

There are Sub Inputs to the three Aux bus and the Stereo bus, for linking a submixer to the MC console.