The new MV12/6 Mixer is our high performance mixer specially designed for use in a smaller commerical applications. Our engineers took extra effort in designing the MV12/6 so as to provide maximum ease and flexibility when installing and using the mixer....
The new MV12/6 Mixer is our high performance mixer specially designed for use in a smaller commerical applications. Our engineers took extra effort in designing the MV12/6 so as to provide maximum ease and flexibility when installing and using the mixer. Euro-block connectors and connector panel's changeable mounting allow the unit to be installed in locations that would be impossible for other mixers. 12 Input channels are just right for smaller applications and 6 independently assignable output buses (4 group + stereo) deliver exceptional versatility. Where superior sound quality and versatility in a rack mount system are required for any smaller commerical application, the MV12/6 is an unbeatable choice.
All channels feature a 3-band EQ (High, Mid, Low), two auxiliary sends (AUX2 is switchable between pre- and post-fader modes), effect send, bus switches for routing to group 1/2, group 3/4 and stereo outputs and a channel fader. In addition they are equipped with a 44-dB gain trim, peak indicator and pan pot.
For maximum installation flexibility, the MV12/6's connector panel can be mounted on the rear or the top of the unit. This enables the 7U rack-mount mixer to be easily installed in locations where other devices may not.
4 Group and Stereo Buses, 7-Band EQ and 16 Digital Effects
Signals from the 12 channels inputs can be routed to any of the four group or stereo buses creating a maximum of 6 independent outputs. Group 1/2 and 3/4 buses are equipped with TO ST switches that send the signal to the stereo bus when engaged or keep the signal independent of the stereo out signal. Built in high quality digital effects add a professional touch to any mix so the MV12/6 offers a total of 16 effects programs from which to choose. The selected effect can be applied to the stereo out signal as well as the group 1/2 and 3/4 signals. The stereo out signal can be further processed with the unit's built-in 7-band graphic equalizer that delivers detailed overall response shaping of the main speakers. The MV12/6 also allows the return signal to be routed independently to the group 1/2, 3/4 and/or stereo buses.
Inputs 1-8 are all equipped with both XLR and Euro-block connectors for quick, easy and flexible connectivity. Channels 1-8 are also equipped with individual phantom power switches. Channels 9/10 and 11/12 are stereo input channels with both RCA jacks and Euro-block connecters supplied.
Like the mixer's input section, the output section's Stereo Out, Group Out 1-4, Monitor and MONO Outputs also utilizes Euro-block connectors for quick, easy and flexible connection. XLR jacks are also provided for Stereo Out and MONO Out while Group Out, AUX 1/2, Effect and Return jacks are all phone plug type.
XLR jack lamp connector on the front panel. Holes provided on the front panel for the installation of protective covers. Phones jack provides easy montoring. Insert I/O jacks supplied on channels 1-4 allow individual effects to be inserted into individual channels. TAPE IN jacks and REC OUT jacks offer easy connection of tape decks for playback and recording.
Audio & Video
|Total Harmonic Distortion||(CH MIC INPUT to ST, GROUP OUT/AUX, EFFECT SEND) Less than 0.1% (THD+N) 20Hz-20kHz @ +14dB 600ohms|
|Frequency Response||(CH MIC INPUT to ST, GROUP OUT/AUX, EFFECT SEND) +1, -3dB 20Hz-20kHz @ +4dB 600ohms (Input Gain Control at Minimum)|
|Hum & Noise||(20Hz-20kHz)*1 Rs=150ohms Input Gain=Max. = Input sensitivity=-60dB|
|-128dB||Equivalent input noise|
|-95dB||Residual output noise|
|-64dB (68dB S/N)||STEREO OUT Master fader and one channel fader at nominal level and CH assign switch is on.|
|-90dB (94dB S/N)||GROUP OUT Master fader at nominal level and all channel assign switches off.|
|-84dB (88dB S/N)||AUX SEND, EFFECT SEND Master level control at nominal level and all channel send controls at minimum.|
|60dB||CH MIC INPUT to CH INSERT OUT|
|84dB||CH MIC INPUT to GROUP OUT|
|94dB||CH MIC INPUT to STEREO OUT (GROUP to ST)|
|76dB||CH MIC INPUT to AUX1 SEND, AUX2 SEND (PRE)|
|86dB||CH MIC INPUT to AUX2 SEND (POST), EFFECT SEND|
|58dB||ST INPUT to STEREO OUT (CH to ST)|
|Ch Input Gain Control||44dB variable|
|ST INPUT GAIN control||44dB variable|
|Crosstalk||-70dB @ 1kHz adjacent inputs -70dB @ 1kHz input to output (CH INPUT)|
|INPUT Channel Equalization +/- 15dB Maximum||HIGH - 10KhZ (SHELVING*2) MID - 2.5kHz (peaking) LOW - 100Hz (shelving*2)|
|Phantom Power||+48V DC is applied to balanced inputs (via 6.8kohms current limiting/isolation resistors) for powering condenser microphones; may be turned ON or OFF via LINE/MIC/MIC (+48V) switch.|
|CH & ST INPUT Peak Indicators||LED (red) on each channel turns on when POST-EQ signal reaches +17dB.|
|Meters||12 points LED meter x 2|
|Graphic Equalizer||7 band (125, 250, 500, 1k, 2k, 4k, 8kHz) +/- 12dB Maximum|
|Internal Digital Effect||16 Program|
|Lamp Connector||XLR type ( 12V 0.5A )|
|Power Requirement||General 50W 230V AC 50Hz|
|Dimension (W x H x D)||18 15/16" x 12 1/8" x 7 9/16"|
|Weight||9.0 kg (19.8 lbs)|
|Panel Color||APPROXIMATE MUNSELL VALUE 5PB 3/2|