Features
Balanced
Lo-impedance XLR and unbalanced phone jack inputs.
Switchable +48 V phantom power
This is for use with the condenser micro-phones.
3-band equalization
Comprehensive effects send and return facilities
This is for use with external effects.
Versatile monitoring of all inputs
It includes tape and effects return.
Tape input and output facilities
These features are for backing tapes and performance recording.
7 band graphic equalizer
+/-12 dB cut/boost at 125 Hz, 250 Hz, 500Hz, 1 kHz, 2 kHz, 4kHz, 8 kHz.
Line out facility
This is for connection to additional amplifier/speaker systems.
High performance 200W power amplifier
Speaker output limiter protection
Soft start function
It protects speakers at switch on.
Good power to weight ratio
This is for portability.
Technology
Audio & Video
Specs
Specifications
| Maximum Output Power | 200 W @ 4 ohms 0.5% (THD) at 1 kHz 120 W @ 8 ohms 0.5% (THD) at 1 kHz | |
|---|---|---|
| Maximum Output Level | +20dB (MON Out) @ 600 ohms 0.5% at 1 kHz +20 dB (EFF Send) @ 10 kohms 0.5% at 1 kHz | |
| Total Harmonic Distortion | Less than 0.3% 20 Hz-20 kHz @ 100 W/4 ohms (MIC In to SP Out) Less than 0.2% 20 Hz-20 kHz @ +4 dB/600 ohms (MIC In to Line Out) | |
| Frequency Response | +1, -3 dB 20 Hz-20 kHz @ 1 W/8 ohms (SP Out) +1, -3 dB 20 Hz-20 kHz @ +4 dB/600 ohms (Line Out) | |
| Hum and Noise (20 Hz-20 kHz) Rs=150 ohms | -120 dB Equivalent Input Noise -70 dB Residual output noise (SP Out) -100 dB Residual output noise (Line Out/ MON Out) -105 dB Residual output noise (EFF Send) -77 dB (81 dB S/N) Line Out Master control level at max. level and all CH control levels at min. level. -71 dB (75 dB S/N) Line Out Master control level at maximum level and one CH control level at nominal level. -77 dB (81 dB S/N) MON Out Master control level at max. level and all CH Monitor control levels at min. level -71 dB (75 dB S/N) MON Out Master control level at maximum level and one CH Monitor control level at nominal level -93 dB (83 dB S/N) EFF SEND Master control level at maximum level and all CH EFF Send control levels at minimum level -85 dB (75 dB S/N) EFF Send Master control level at maximum level and one CH EFF Send controls at nominal level | |
| Crosstalk@1kHz | 60 dB adjacent input channels 60 dB input to output | |
| Maximum Voltage Gain | 82 dB MIC In to SP Out 55 dB MIC In to Line Out 41 dB MIC In to REC Out 55 dB MIC In to MON Out 47 dB MIC In to EFF SEND 30 dB Line In to Line Out 30 dB EFF RTN to Line Out 30 dB EFF RTN to MON Out 20 dB Tape In to Line Out 20 dB Tape In to MON Out | |
| Input Channel Equalization | +/-15 dB maximum boost or cut in each of three bands High: 10 kHz shelving Middle: 2 kHz peaking Low: 100 Hz shelving | |
| Graphic Equalization | +/-12 dB maximum boost or cut in each of seven bands 125, 250, 500 Hz, 1k, 2k, 4k, 8 kHz:peaking | |
| Limiter | Input overload: 15 dB | |
| Indicator LEDS | Power Red LED is lit when power is "On" Protection Red LED is lit when protection circuitry is activated Limiter Red LED is lit when limiter circuitry is activated | |
| Protection Circuit | Power on mute 6+/- sec. Muting time DC sense DC +/-2 V Output shut off PC limiter less than 2ohms @ Load Impedance | |
| Phantom Power | +48 Vdc is applied to electrically balanced XLR inputs (via 6.8 kohms current limiting/ isolation resistors) for Phantom powered condenser microphones. | |
| Power Requirements | UL/CSA model 120 V AC 60 Hz General model 220/ 240 V AC 50/60 Hz | |
| Power Consumptions | UL/ CSA model 180 W General model 180W | |
| Dimensions (W x H x D) | 480 x 132 x 346.8 mm (18-7/8" x 5-3/16" x 13-5/8") | |
| Weight | 12kg (26lbs 7 oz) | |
