Features
High Power In Stereo
The A100A puts out 50 continuous watts per channel into 8-ohm loads.
Features
High Power In Stereo
The A100A puts out 50 continuous watts per channel into 8-ohm loads.
Large Power Meters and Clip Indicators
Two large, illuminated power meters that provide readout in power (watts into 8 ohms) as well as decibels. Precision clip indicators for each channel warn of peak signal levels that may cause distortion.
Independent Output Level Controls
Independent front-panel output level controls for the channel A and channel B.
Two Types of input Connectors
Both RCA-type pin jacks and 1/4" phone jacks on each input.
Front-panel Headphone Jack
Technology
Audio & Video
Specs
Specifications
| Input Jacks | Pin jack x 1/ch. Phone jack x 1/ch | |
|---|---|---|
| Output Connectors | 4P push terminals | |
| Rated output | 50W + 50W (1% THD. 8 Ohm) | |
| Input Sensitivity | -10 db (245 mV). (1khz, 50W/8 Ohm, vol. max.) | |
| Voltage Gain | 38.2 db (1kHz) | |
| Frequency Response | 20 Hz-20kHz (0 +/- 0.5 dB) | |
| Power Bandwidth | 10 Hz-40 kHz (0.2% THD, 25W/8 Ohm) | |
| Total Harmonic Distortion | 0.02% (1kHz, 25 W/8 ohm) 0.2% (20Hz-20kHz, 25 W/8 Ohm) | |
| Intermodulation Distortion | 0.2% (70 Hz : 7kHz = 4 : 1, 25 W/8 Ohm) | |
| Channel Separation | 70 dB (1kHz), 60 dB (20 Hz-10kHz) | |
| Signal to Noise Ratio | -107 dB (input shorted, IHFA) | |
| Residual Noise | -79 dB (vol. min., IHF A) | |
| Slew Rate | 10V/mmsec. (full swing, 8 Ohm) | |
| Damping Factor | > 70 (1 kHz/8 Ohm), > 60 (20 Hz - 20kHz, 8 Ohm) | |
| Input Impedance | > 7.5 k Ohm | |
| Power Requirement | U.S. and Canadian Models: AC 120V 60 Hz General Model: AC 230 V 50 Hz UK Model: AC240V 50 Hz | |
| Power Consumption | U.S. and Canadian Models: 160W General and UK Models: 120W | |
| Dimension (W x H x D) | 220 X 97.5 X 297.3mm (8-11/16" x 3-13/16" x 11-11/16") | |
| Weight | 4.6kg (10 lbs. 2 oz) | |
