H7000

The H7000 delivers 750 watts per channel into 8 OHM loads. The H-series amps is approximately twice as efficient as conventional types. This means that for the same power output you only need half the power normally required from the AC supply. The amps themselves run cooler for significantly improved reliability.

It aims for the best possible sound quality through careful component selection, circuit design, layout, and construction.

It can also be used in the bridged mono mode for extra high power: 1900 watts into 4-ohm loads. It has an extra margin of flexibility with a dual mono mode which allows a single input signal to drive two independent speaker systems. In the dual mono mode the power rating for each speaker system is the same as in the stereo mode.

15-pin MONITOR/REMOTE terminals on the rear panels of all three H-series models provide direct compatibility with MediaLink™ protocol networks for state-of-the-art computer based system control and monitoring - an important advantage in large systems with many amplifiers in remote locations. The H-series amplifiers allow power and channel mute control as well as status monitoring of per-relay output level, clipping, output on/off, and heat sink temperature. Level control is also possible with the addition of an optional circuit board.

Power-on muting isolates the speaker outputs for several seconds after the power is turned on. This prevents the power-on voltage surge from reaching the speakers and allows the amplifier circuitry to stabalize before operation begins. DC sensing circuitry shuts off the outputs if a DC voltage greater than +/= 2volts is detected at the output terminals. Thermal protection shuts down the system if the heat sink temperature exceeds 90°C.

It features a comprehensive cooling system for optimum reliability and safety. Dual variable-speed fans automatically maintain internal temperatures within a safe operating range.

The input attenuators features precisely-calibrated detents and smooth, noise-free control, This configuration allows accurate, repeatable levels settings while providing perfect level matching between channels.

Both balanced XLR and balanced phone jack input terminals are provided. Heavy-duty binding-post type terminals ensure solid, reliable speaker connections.

This thoughtful feature lets you lift pin 1 of the XLR-type connectors from ground to interrupt ground-loops when they occur, achieving quiet, hum-free operation.