Controls and Features
The Q2031A offers a full 6 or 12dB cut or boost at any of 31 points, which are centered at ISO (International Standards Organization) 1/3 octave frequencies from 20hz to 20kHz. Each channel features 31 separate active filters. Each filter has a positive ...
Controls and Features
The Q2031A offers a full 6 or 12dB cut or boost at any of 31 points, which are centered at ISO (International Standards Organization) 1/3 octave frequencies from 20hz to 20kHz. Each channel features 31 separate active filters. Each filter has a positive detent in the center "flat response" position.
Each channel features a range switch so that the boost and cut range of the filters can be reduced from the normal +/-12dB to +/-6dB.
Input and Output Capabilities
Each channel features balanced, low-impedance XLR type connector inputs and outputs, as well as unbalanced high-impedance 1/4" phone jack connectors. Should input transformer isolation be desired, two octal sockets are provided on the back panel for insertion of 15 k to 15 k ohm bridging type transformers. Both channels have slider level controls. The EQ IN/Out switches have green LED indicators that let you know when the EQ is On.
Continuously Variable HPFs
High Pass Filters are provided on both equalizer channels. They provide 12dB per octave rolloff below the desired frequency adjustable from 20Hz to 200Hz. A green LED indicates that the high pass filter is in use.
Independent peak indicators (red LEDs) are provided for each channel. The automatic muting circuit remains muted for approximately 3 to 5 seconds after the power is switched On, preventing transients from damaging amplifiers and speaker systems.
Audio & Video
|Frequency Response||0 +/- 0.5dB 20Hz ~20kHz|
|Total Harmonic Distortion||Less than 0.1% @ +14dB 20Hz~20kHz|
|Hum and Noise||-96dB output noise; Input level control maximum and equalizer flat (0dB)|
|Maximum Voltage Gain||+24dB; Input sw at -20dB and Output sw at +4dB|
|Indicators||Power "On"......Red GEQ "On"....Green HPF "On" ....Green GEQ range "+6dB"....Orange Peak Indicator....Red Turns On when the instantaneous level is 3dB below clipping (+17 dB)|
|Controls||GEQ: 31 band (1/3 octave) 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k ,5k, 6.3k, 8k, 10k, 12.5k, 16k, 20kHz :Range SW +/-6/12dB On/Off SW Input Level Control Input Level SW: -20/+4dB Output Level SW: -20/+4db|
|Hi-Pass Filter (12dB/ octave)||Roll off Frequency: 20 ~ 200Hz On/Off SW|
|Power Requirement||120V AC, 60Hz|
|Dimension and Weight||18-7/8" (W) x 3-1/2" (H) x 11-3/4" (D) (480 x 88 x 298mm) 10.6 lbs (4.8 kg)|