﻿CVP-701 Owner's Manual

Mixing Console – Editing the Volume and Tonal Balance –

(Figure)
The Mixing Console gives you intuitive control over various sonic aspects of the keyboard parts and Song/Style channels, including volume balance and the timbre of the sounds. It lets you adjust the levels and stereo position (pan) of each Voice to set the optimum balance and stereo image, and lets you set how the effects are applied.

Basic Procedure
1	Press the [MIXING CONSOLE] button to call up the MIXING CONSOLE display.
The volume and other settings for each Part are shown via the slider or knob icons.
NOTE
Although the Mixing Console function provides several displays (see next page), the VOL/VOICE display is called up when you first press the [MIXING CONSOLE] button after turning on the power.
(Figure)
2	Use the [A] – [J] buttons to select a parameter, then use the [1 Up Down] – [8 Up Down] buttons to set the value for each part.
The slider or knob shaped parameters can be edited via the [1 Up Down] – [8 Up Down] buttons. For instructions on editing the other parameters, refer to the Reference Manual on the website.
To reset the value, press the same number [ Up]/[ Down] buttons simultaneously.
NOTE
When editing one part, you can instantly set the same value for all other parts, by simultaneously holding down one of the [A] – [J] buttons and using the [1 Up Down] – [8 Up Down] buttons (or the DATA ENTRY dial).
3	Use the [MIXING CONSOLE] button to select the target parts, and use the TAB [Left][Right]  buttons to call up the desired display, then set the values on each part/display to create the desired sound.
The operation to set the value is the same as in step 2.

To select the target parts:
Press the [MIXING CONSOLE] button repeatedly to call up the display for the following parts in sequence.
(Figure)
PANEL PART
Use this display when you want to adjust the balance between the entire Song part, entire Style part, Mic part, Right 1 part, Right 2 part and Left part.
STYLE PART
Use this display when you want to adjust the balance between all parts of the Style.
SONG CH 1 – 8 or SONG CH 9 – 16
Use this display when you want to adjust the balance between all parts of the Song. Pressing the [A] (PART) button will alternates the display between SONG CH 1 – 8 and SONG CH 9 – 16.

NOTE
The Style/Song part components are the same as those that appear in the display when you press the panel [CHANNEL ON/OFF] button once or twice.

To call up the desired display
Press the TAB [Left][Right]  buttons to select the desired display from the following items. For details about each display Page, refer to the Reference Manual on the website.
(Figure)
VOL/VOICE
Changes the Voice for each part and adjusts panning and volume for each part.
FILTER
Adjusts the Harmonic Content (resonance) and sound brightness.
TUNE
Pitch-related settings (tuning, transpose, etc.).
EFFECT
Selects the effect type and adjusts the effect depth for each part (page 102).
EQ
Boosts or attenuates the high and low frequencies bands for each part to correct the tone or timbre of the sound.
MEQ
Selects the Master EQ type that is applied to the overall sound, and lets you edit the parameters for tone control.
CMP
This is the Master Compressor setting which determines the dynamics of the overall sound.

4	Save your MIXING CONSOLE settings.

To save the PANEL PART display settings:
Register them to Registration Memory (page 97).

To save the STYLE PART display settings:
Save them as Style data.
1	Call up the operation display. 
[FUNCTION] | TAB[Left][Right]  MENU2 | [A] STYLE CREATOR
2	Press the [EXIT] button to close the RECORD display.
3	Press the [I] (SAVE) button to call up the Style Selection display for saving your data, then save it (page 81).

To save the SONG CH 1 – 8 / 9 – 16 display settings:
First register the edited settings as part of the Song data (SETUP), then save the Song.
1	Call up the operation display. 
[FUNCTION] | TAB [Left][Right]  MENU2 | [B] SONG CREATOR
2	Use the TAB [Left][Right]  buttons to select the SETUP Page.
3	Press the [7 Up Down]/[8 Up Down] buttons.
4	Press the [I] (SAVE) button to call up the Song Selection display for saving your data, then save it (page 81).

(Table)
Advanced Features
Refer to the Reference Manual on the website, Chapter 10.		
Adjusting Panning/Volume:	[MIXING CONSOLE] | TAB [Left][Right]  VOL/VOICE
Changing the Voice:	[MIXING CONSOLE] | TAB [Left][Right]  VOL/ VOICE | [C]/[H] | [1 Up Down] – [8 Up Down] | VOICE buttons | [A] – [J]
Editing FILTER parameters:	[MIXING CONSOLE] | TAB [Left][Right]  FILTER
Editing TUNE parameters:	[MIXING CONSOLE] | TAB [Left][Right]  TUNE
Changing an Effect type:	[MIXING CONSOLE] | TAB [Left][Right]  EFFECT
Editing EQ parameters:	[MIXING CONSOLE] | TAB [Left][Right]  EQ
Selecting the Master EQ type: 	[MIXING CONSOLE] | TAB [Left][Right]  MEQ
Editing Master Compressor settings: 	[MIXING CONSOLE] | TAB [Left][Right]  CMP
(Table End)

This is the end of the file.