﻿CVP-701 Owner's Manual

Utility/System – Making Global Settings –

(Figure)
The Utility and System sections in the Function menu provide a variety of convenient tools and settings for the instrument. These include general settings that affect the entire instrument, as well as detailed settings for specific functions. Also included are data reset functions and storage media control, such as media formatting.

UTILITY display
There are four pages.

CONFIG1	
For general settings such as:
Fade in/out time
Metronome sound
Tap Tempo sound
Auto power off (page 18)
LCD brightness (page 21)

CONFIG2
For general settings, such as determining:
Whether or not the speakers will sound
Whether the Stereophonic Optimizer (page 20) is on or off
Whether the Noise Gate for the input signal from the [AUX IN] jack is on or off
Whether IAC (page 19) is on or off and the depth of the effect
Whether or not the default tempo of each Style is displayed in the Style Selection display
Whether or not the Voice bank and number are shown in the Voice Selection display
Whether the updated date and updated time* are shown or hidden on the File Selection display (only in the USER/USB tabs)
How the Voice Selection display is opened when one of the VOICE buttons is pressed
The time which elapses before the pop-up windows close
* Taken from a network and displayed when connecting the instrument to a network via the wireless LAN adaptor.

PARAMETER LOCK	
For selecting specific parameters to be locked, so that you can maintain settings even when the panel setups are changed by Registration Memory, One Touch Setting, etc.

USB
Settings related to a connected USB flash drive, such as formatting (page 107) and confirmation of memory size.

SYSTEM display
There are four pages.

OWNER
Settings of Owner name (page 22) and Message language (page 21).

BACKUP/RESTORE
For backing up or restoring the settings and data saved in the USER drive of the instrument (page 38) to or from a USB flash drive.

SETUP FILES
For saving and recalling the specified settings of the instrument.

RESET
For resetting all or specified settings of the instrument to the factory default, or deleting all the files you saved in the USER drive while leaving the settings of the instrument.

Basic Procedure
1	Call up the operation display:
(Figure)
UTILITY display: 1 [FUNCTION] | 2 TAB [Left][Right]  MENU1 | 3 [J] (UTILITY)
SYSTEM display: 1 [FUNCTION] | 2 TAB [Left][Right]  MENU2 | 3 [G] (SYSTEM)
2	Use the TAB [Left][Right]  buttons to call up desired page.
3	If two or more parameters are shown at the left of the display, use the [A]/[B] buttons to select the desired parameter.
4	Change the settings by using the [1 Up Down] – [8 Up Down] buttons or carry out the operation by using the [A] – [J] buttons.

For details of the Utility and System settings, refer to the Reference Manual on the website (page 9).

This is the end of the file.