﻿P-145
P-143
Owner’s Manual


Setting Up

Power Requirements

Connect the AC adaptor plugs in the following order.

(Figure)
DC IN jack
1 
AC Adaptor 
2 
AC Outlet

WARNING
Use the supplied or the specified AC adaptor (page 14) only. Using the wrong AC adaptor can result in damage to the instrument or overheating.
When using the AC adaptor with a removable plug, make sure to keep the plug attached to the AC adaptor. Using the plug alone can cause electric shock or fire.
Never touch the metallic section when attaching the plug. To avoid electric shock, short circuit or damage, also be careful that there is no dust between the AC adaptor and plug.

(Figure)
Plug
Slide the plug as indicated
The shape of the plug and outlet differ depending on the locale.

WARNING
When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn the power off and disconnect the plug from the outlet.

NOTE
Follow this procedure in reverse order when disconnecting the AC adaptor.



Turning the Power On/Off

1	Set the volume to the minimum.
2	Press the [Standby/On] switch to turn on the power.
(Figure)

When the power is supplied to the instrument, the power lamp located on the right of the power switch is turned on. While playing the keyboard, adjust the volume level by using the [VOLUME] slider.

To turn off the power, press the [Standby/On] switch again for a second.

WARNING
Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.


Auto Power Off Function

To prevent unnecessary power consumption, this function automatically turns the power off if no buttons or keys are operated for approximately 15 minutes. For the settings of the Auto Power Off function, see page 10.

Disabling Auto Power Off (simple method)
While holding down the lowest key (A minus 1), press the [Standby/On] switch. The power turns on with the Auto Power Off function disabled.

(Figure)
Lowest key (A minus 1)


Using a Footswitch or a Foot pedal

The [SUSTAIN] jack is for connecting the included footswitch, which works in the same way as a damper pedal on an acoustic piano. Also a separately sold foot pedal or footswitch (page 15) can be connected to this jack.

(Figure)

NOTE
Make sure that power is OFF when connecting or disconnecting the footswitch or pedal.
Do not press the footswitch when turning the power on. Doing this changes the recognized polarity of the footswitch, resulting in reversed footswitch operation.


This is the end of the file.