RX-V475 Factory Reset

Last Update: 7/2/2013

RX-V475 Factory Reset

 

Note: This procedure will be done on the front panel.

 

1.    Set the unit to Standby Mode using the Power button. (Upper left corner.)


2.    While holding down Straight button, hit the Power button.Keep holding down the Straight button until you see Advanced Setup flash on the front screen or SP IMP.

   

3.    Use the Program Selector buttons to navigate to INIT CANCEL.

    

4.  Press the Straight button repeatedly to select ALL.

          

5.    When the proper selection is made, turn off the unit using the Power button.The settings will be reflected the next time the unit is powered on.


 

Was this answer helpful?
Do you need an additional help? Contact Information