RX-V663 Selecting Remote ID's

Last Update: 1/27/2017

1 Press 2CODE SET using a ballpoint pen or
a similar object.
The BTRANSMIT indicator on the remote control
flashes twice.
2 Press the numeric buttons (6) to enter the
code number “00001” or “00002”.
The BTRANSMIT indicator on the remote control
flashes twice, and the AMP ID code is
On the Receiver
1.  Press the SYSTEM OFF on the front panel to set this unit to the standby mode.
2.  Press and hold the TONE CONTROL and then press MAIN ZONE ON/OFF to turn on this unit.
(This unit turns on, and the advanced setup menu appears in the front panel display.)
3.  Rotate the PROGRAM selector to select REMOTE AMP.  It will say REMOTE AMP ID1 or ID2.  
4.  Press the TONE CONTROL button repeatedly to make your selection.  (AMP ID1 is the default.)
5.  Press the SYSTEM OFF button to turn off. Settings will be changed the nest time the unit is powered 
On the Remote
1 Press CODE SET using a ballpoint pen or a similar object.  
The TRANSMIT indicator on the remote control flashes twice.
2 Press the numeric buttons to enter the code number “00001” or “00002”.
The TRANSMIT indicator on the remote control flashes twice, and the AMP ID code is Set.  
Was this answer helpful?
Do you need an additional help? Contact Information