[Audio&Visual]How do I set up the MusicCast CONTROLLER?

Last Update: 7/5/2019

We will guide you through the setup procedure below.
The setup method differs depending on the OS installed in your mobile device. Please refer to the setup procedure for your OS.
In addition, please complete initial setting within 2 minutes from the start.

* MusicCast CONTROLLER app does not support the connection of IPv6-enabled router (Internet Protocol Version 6). Prepare a router that supports IPv4 (Internet Protocol Version 4).

Click here for setting iOS mobile device.
If you want to see the explanation by the Youtube video, Click here.

Click here for setting Android OS mobile device.

* Before setting up the MusicCast CONTROLLER app, please check the following contents in advance.

  • MusicCast CONTROLLER app installed on your mobile device.
  • Your mobile device is connected via Wi-Fi.
  • Your mobile device and router are connected by a primary line.
  • The Wi-Fi antenna of the MusicCast compatible device is connected.
  • The MusicCast compatible device and router are connected by a LAN cable. (Not required when connecting via Wi-Fi.)

* MusicCast CONTROLLER app can be obtained by clicking the App Store and the Google Play badge below.

Get it on Google Play

Setting method of iOS mobile device

1. Launch MusicCast CONTROLLER app on your mobile device and tap ”Setup”.

GJA14160_Pic3

2. Turn on the MusicCast compatible device and tap Next.

GJA14160_Pic4

3. Press and hold the "Connect" button on the MusicCast compatible device for 5 seconds, and when "CONNECT" is displayed on the MusicCast compatible device's display, tap Next. (LED flashes on models without LCD display)

GJA14160_Pic5

Tap Next to switch to the connection waiting screen

GJA14160_Pic6

GJA14160_Pic7

When the iOS mobile device confirms the connection of the compatible device, it shifts to the Wi-Fi setting screen.
When connecting the second and subsequent compatible device, please proceed from here to the next step.

4. Press Home button on the iOS mobile device to return to the home screen and tap Settings.

GJA14160_Pic8

5. Select the Wi-Fi network.

GJA14160_Pic9

A: The router (SSID) to which the customer is currently connected is displayed.

6. From the network selection in the Wi-Fi settings screen, find and tap "MusicCastSetup".

GJA14160_Pic10

B: Currently connected router (SSID)
C: Wi-Fi device detected at customer's home

Make sure MusicCastSetup is selected.
* At this time, a security advisory may appear on the iOS mobile device, but don't have to worry, as your mobile device and MusicCast compatible device will be directly connected and the external network is not accessed. Also, the communication when sharing the password from your mobile device to the MusicCast compatible device is concealed. Even if the wireless network is intercepted, the password will not leak, so please proceed to the next procedure with confidence.

GJA14160_Pic11

D: Display security advisory but ignore
E: Wi-Fi device detected at customer's home

Press the home on the iOS mobile device twice, go back to MusicCast CONTROLLER app running in the background, select the router to which you want to connect the MusicCast compatible device and tap Next.

GJA14160_Pic12

F: Router connected in the previous step

7. Select your home wireless network and enter the router password.

GJA14160_Pic13

G: Enter the router's security key (encryption key)

After entering the router password, tap Next.

GJA14160_Pic14

The router is authenticated and shares settings with the MusicCast compatible device.

GJA14160_Pic15

H: Communication when sharing password from your terminal to MusicCast device is concealed, password will not leak even if it is intercepted the radio by any chance

8. Set the location name, (First time only.)
Enter any location name (usually with default settings and no problem) and tap Next.

GJA14160_Pic16

I: Setting the location name is useful when you want to manage 10 or more MusicCast devices. Normally, please use with the default settings.

9. Set the room name, room photo. (In the initial state, the room name is Room 1, and the room image is letter m on gray background.) Enter the room name (enter any name or choose from choices) and tap Next.

GJA14160_Pic17

J: The screen set here is displayed on the home screen of the app. Please set an easy-to- easy-to-distinguish name such as the model number of the device used.

Tap Select a photo, select the desired photo (shoot with camera, select from photo library, select from pre-set images) and tap Next.

GJA14160_Pic18

10. Setting is complete. Tap Finish to complete the configuration.

GJA14160_Pic19

Return to the top of iOS setting procedure
Return to page TOP

If you can not make settings by following the instructions, please contact us with the following information.

  • Your mobile device information (model name, installed OS)
  • Which procedure did not work
  • Displayed error message
  • Diagnostic information of application (available from Demo -> Settings -> Application settings -> Information -> Diagnostic information)

Setting method of Android mobile device

1. Launch MusicCast CONTROLLER app, tap the Setup.

GJA14160_Pic20

2. Turn on the MusicCast compatible device and tap Next.

GJA14160_Pic21

With MusicCast CONTROLLER, you need to allow access to your mobile device's location to find a Wi-Fi access point.

Tap "Allow" when the dialog "Do you want to allow MusicCast to access this mobile device's location?" is displayed.
* Display differs depending on the mobile device.

If location services are not turned on, turn on location services to set up MusicCast app. In the dialog that appears, tap Settings to turn on location services.
* Display differs depending on the mobile device.

3. Press and the Hold the “connect” button on the MusicCast compatible device for 5 seconds. "CONNECT" will be displayed on the MusicCast® device's display (the LED will blink on models without a liquid crystal display) and it will shift to the screen waiting for connection.

GJA14160_Pic22

3-1 Depending on your mobile device, the screen "Please select MusicCastSetup" will appear. If it is displayed, please tap "Settings" and select "MusicCastSetup" from the Wi-Fi setting of the terminal. 

GJA14160_Pic23

GJA14160_Pic24

* The screen is an image. Display differs depending on the mobile device.

3-2 Select the router to which you want to connect the MusicCast compatible device, enter the router's password key, and tap Connect.

GJA14160_Pic25

4. Set the location name. (First time only.)
Enter any location name (usually with default settings and no problem) and tap Next.

GJA14160_Pic26

5. Set the room name, room photo. (In the initial state, the name of the room is Room 1, and the picture of the room is letter m on gray background)
Enter a name for the room (enter any name or choose from choices) and tap Next.

GJA14160_Pic27

6. Tap Select a photo, select the desired photo (shoot with camera, select from photo library, select from pre-set images) and tap Next. 

GJA14160_Pic28

7. Setting is complete! Tap Finish to complete the configuration.

GJA14160_Pic29

Return to the top of the Android setting procedure
Return to page TOP

If you can not make settings by following the instructions, please contact us with the following information.

  • Your mobile device information (model name, installed OS)
  • Which procedure did not work
  • Displayed error message
  • Diagnostic information of application (available from Demo -> Settings -> Application settings -> Information -> Diagnostic information)

 

Was this answer helpful?
Do you need an additional help? Contact Information