MTX-MRX Editor

MTX-MRX Editor

MTX-MRX Editor is a software application that is dedicated to the setup and management of sound systems built around the MTX and MRX series signal processors.

Dedicated Software for Total Sound System Design

MTX-MRX Editor is a software application designed for set up and management of audio systems built around MTX and MRX series signal processors. Use MTX-MRX Editor to build audio mixes and configure signal routing from microphones, CDs, MP3 and WAV files as well as, to manage multiple processors and power amplifiers from a single PC. Deliver different content to multiple zones, set up timer-activated music playback and announcements, and much more. MTX-MRX Editor makes it easy to manage and distribute sound that is optimized for separate areas of a store or facility from a single computer.

Centralized management of multiple network systems with Single PC

Furthermore, in Ver 3.2, for example, in multiple facilities such as amusement parks and shopping malls, it is possible to manage multiple areas separately on multiple subnets for each zone by a single PC.

Related Products

EXi8

EXi8 input expanders convert analog microphone/line audio to digital and transmits the signal using Yamaha's YDIF format. The EXi8's preamps can be controlled remotely from MTX/MRX series processor via Ethernet cable.

EXo8

EXo8 output expanders feature 8 channels of DA converters that produce high quality analog audio by converting digital output from MTX/MRX series processors via YDIF.

DCP1V4S

1 Volume & 4 Switch equipped Wall Mount Control panel for MTX/MRX Series and MA/PA series. Easy connection by CAT5 carrying RS485 + power. Maximum 8 DCPs can be connected to 1 MTX/MRX Series. 1 DCP1V4S can be connected to 1 MA2030a/MA2030. Maximum 2 DCPs can be connected to 1 MA2120 or PA2120.

DCP4S

4 Switch equipped Wall Mount Control panel for MTX/MRX Series and MA/PA series. Easy connection by CAT5 carrying RS485 + power. Maximum 8 DCPs can be connected to 1 MTX/MRX Series. Maximum 2 DCPs can be connected to 1 MA2120 or PA2120.

DCP4V4S

4 Volume & 4 Switch equipped Wall Mount Control panel for MTX/MRX Series and MA/PA series. Easy connection by CAT5 carrying RS485 + power. Maximum 8 DCPs can be connected to 1 MTX/MRX Series. Maximum 2 DCPs can be connected to 1 MA2120 or PA2120.

Related Software

The colors and finishes shown may vary from those on the actual products.