YWA-10

YWA-10

Wireless Network Adapter The Yamaha YWA-10 wireless network adapter can be used to connect a Yamaha network AV receiver to a wireless home network. The YWA-10 connects to the Ethernet port on the back of your Yamaha network receiver and communicates directly with your wireless router. It's powered by the DC out jack or USB port of the receiver, so there is no need to take up an additional electrical outlet. The YWA-10 even has a second Ethernet output that can be used to provide network access to another device such as a smart TV or Blu-ray Disc™ player.

Main Features

• IEEE 802.11b/g/n compatible

• Auto setup by WPS (Wi-Fi Protected Setup)

• Manual setup by PC

• Two LAN ports to support up to two network products

• Power supply via USB from certain Yamaha models

Dimensions and Weight

3-1/8" x 2-3/4" x 7/8"

0.1 lbs.

Compatible Models

Compatible with all network devices with an Ethernet/LAN output and USB port for power. Includes, but not limited to, the following:

HTR-4066

TSR-6750WA (YWA-10 included)

RX-A730, RX-A830, RX-A1030, RX-A2030, RX-A3030

RX-V475, RX-V575, RX-V675, RX-V775WA (YWA-10 is included with the RX-V775WA)

HTR-4065, HTR-7065

RX-A720, RX-A820, RX-A1020, RX-A2020, RX-A3020

RX-V473, RX-V573, RX-V673, RX-V773 (YWA-10 is included in the RX-V773WA)

RX-V671, RX-V871

RX-A710, RX-A810, RX-A1010, RX-A2010, RX-A3010

RX-A1000, RX-A2000, RX-A3000

RX-Z11, RX-V3900, RX-Z7, RX-V2065

[Notice]

*Power to the YWA-10 is supplied when the connected receiver is powered on.

*Power to the YWA-10 can be supplied when the connected AV receiver is in the off position, only if the AV receiver Network Standby mode is set to on. (Except for the RX-V 71 Series or AVENTAGE RX-A 10 Series.)

Example of Connection

YWA-10 allows Yamaha AV products equipped with a network port and a DC out jack (USB) to be connected with a wireless LAN.

Power Requirements

The YWA-10 can be powered via USB from certain Yamaha models. If your Yamaha model does not have an available USB port, the wireless adapter can also be powered by a 5 V / 0.5 A USB power supply (similar to the wall/USB charger shipped with most mobile phones).

The colors and finishes shown may vary from those on the actual products.