Hexrack II
The Evolution of the HEXRACK From Generation I to Generation II
The original HEXRACK system amazed drummers around the globe with its innovative design and amazing flexibility. To take it to the next level, we listened closely to user feedback, consulted with our Yamaha artists, and went back to a clean slate to build and all new system… one that delivers flexibility and strength even greater than before. The design of the all-new HEXRACKII starts with a new aluminum alloy that delivers strength far beyond what the original system offered while being amazingly light in weight. A refined clamp system features a new design that provides drummers with infinite possibilities and flexibility. The HEXRACKII also offers compatibility with the original HEXRACK system, so owners of the original can use what they have with the new system. The all-new HEXRACKII… changing the way drummers think about kit setup. It will have your imagination running wild.
Product Information
HXR2LII
The basic HEXRACKII set consists of two legs and is fully compatible with Yamaha System Hardware. Compared to a typical hardware setup, the HEXRACKII uses less space and reduces floor clutter produced by stand legs, etc., around the kit. The system’s pipes and racks are made from aluminum, which makes the system lighter, transport and setup easier. And with a wide variety of optional clamps available, the rack system offers great expandability.
The basic HEXRACKII set consists of two legs and is fully compatible with Yamaha System Hardware. Compared to a typical hardware setup, the HEXRACKII uses less space and reduces floor clutter produced by stand legs, etc., around the kit. The system’s pipes and racks are made from aluminum, which makes the system lighter, transport and setup easier. And with a wide variety of optional clamps available, the rack system offers great expandability.
HXREXII
The HXREXII creates a three-leg rack when combined with the HXR2LII.
The HXREXII creates a three-leg rack when combined with the HXR2LII.
HXACII Arm Clamp
Several clamps for securing tubes of different thickness (φ”15 –φ”34, including hexagonal tubes) are connected to the extended arm. These clamps can be used to secure tubes positioned far from each other. Each clamp has a gear joint, enabling fine angle adjustment.
Several clamps for securing tubes of different thickness (φ”15 –φ”34, including hexagonal tubes) are connected to the extended arm. These clamps can be used to secure tubes positioned far from each other. Each clamp has a gear joint, enabling fine angle adjustment.
HXOCII Open Clamp
The open clamp is used to attach tubes having different thickness (diameter 15-34mm, including hexagonal tubes) to the hexagonal tube. Although fine angle adjustment is possible with the gear joint, more stable setting can be achieved by limiting the movement only to the vertical direction.
The open clamp is used to attach tubes having different thickness (diameter 15-34mm, including hexagonal tubes) to the hexagonal tube. Although fine angle adjustment is possible with the gear joint, more stable setting can be achieved by limiting the movement only to the vertical direction.
HXCCII Cross Clamp
The cross clamp is used to connect two hexagonal tubes at 90-degree angles (for example, to connect a leg tube with a tube that has been horizontally set).
The cross clamp is used to connect two hexagonal tubes at 90-degree angles (for example, to connect a leg tube with a tube that has been horizontally set).
HXLCII Logo Clip
The Logo clip, with an integrated level, is a convenient way to set an accurate level for your cross-tube.
The Logo clip, with an integrated level, is a convenient way to set an accurate level for your cross-tube.
HXDBII Double Bass Clamp
The double bass is used to horizontally set two tubes at the same height -as in a double-bass configuration, Settings at various angles are possible when used with the clamp gear joint.
The double bass is used to horizontally set two tubes at the same height -as in a double-bass configuration, Settings at various angles are possible when used with the clamp gear joint.
HXTCII Tom Clamp
This clamp attaches a tom clamp (CL945B, etc.) or cymbal holder (CH755, etc.) to the hex-shaped pipe and is compatible with 22.2mm diameter pipes. Its vertical angle is freely adjustable.
This clamp attaches a tom clamp (CL945B, etc.) or cymbal holder (CH755, etc.) to the hex-shaped pipe and is compatible with 22.2mm diameter pipes. Its vertical angle is freely adjustable.
HXCP24II Curved Pipe
24-inch long x 34mm diameter hexagonal pipe made from aluminum. Using a complex cross section design combined with the aluminum alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe.
24-inch long x 34mm diameter hexagonal pipe made from aluminum. Using a complex cross section design combined with the aluminum alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe.
HXCP36II Curved Pipe
36-inch long x 34mm diameter hexagonal pipe made from aluminum. Using a complex cross section design combined with the aluminum alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe.
36-inch long x 34mm diameter hexagonal pipe made from aluminum. Using a complex cross section design combined with the aluminum alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe.
HXCP44II Curved Pipe
44-inch long x 34mm diameter hexagonal pipe made from aluminum. Using a complex cross section design combined with the aluminum alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe.
44-inch long x 34mm diameter hexagonal pipe made from aluminum. Using a complex cross section design combined with the aluminum alloy creates pipes that are significantly lighter in weight while providing greatly improved strength—as much as double that of conventional round pipe.
HXTL23II T-leg
T-shaped leg for HexRackII (clamp and pipes are made from aluminum).
T-shaped leg for HexRackII (clamp and pipes are made from aluminum).
HXTL30II T-leg
T-shaped leg for HexRackII (clamp and pipes are made from aluminum).
T-shaped leg for HexRackII (clamp and pipes are made from aluminum).
The colors and finishes shown may vary from those on the actual products.
