RM-CG Ceiling Array Microphone
| RM-CG | ||
|---|---|---|
| Dimensions | W560 mm × D560 mm × H90 mm (Includes protrusion/microphone panel: 22 mm) | |
| Weight | 5.6 kg | |
| Power Requirements | PoE (IEEE 802.3af) | |
| Maximum Power Consumption | 7.2 W | |
| Connector | RJ45 | |
| In Operation | Temperature | 0°C - 40°C |
| Humidity | 30% - 90% (no condensation) | |
| Storage | Temperature | -20°C - 60°C |
| Humidity | 20% - 90% (no condensation) | |
| Indicator | Front Indicator (Mute/Unmute & Status), Network Port Indicator | |
| Mount | Ceiling mount, Wire mount, VESA mount | |
| Maximum Device Number with RM-CR | 14 (without VXL1-16P, up to 16) | |
| Accessories | Construction description, (Guarantee), Grille x 1, Screws for grille (M3 x 8 mm) x 5*, Screw cover x 4, Cutting template x 1, C ring x 1, Screws for C ring x 2, Hanger angle x 1, Screws for hanger angle (M4 x 20 mm) x 5*, Terminal Cover x 1, Safety wire x 1, Binding band x 1, Clamp plate x 2 *Including a spare respectively | |
| Dust Protection | IP5X for dust protection (with terminal cover) | |
| Plenum Rating | UL2043 (with terminal cover) | |
| Ether1 | Dante, Remote Control, WebUI, PoE | |
| Cable Requirements | Cat 5e or higher (STP) | |
| Audio I/O | Dante | 1in/2out, In1=AEC reference signal / Out1=output of beam mix, Out2=output of beam mix (simple processed) |
| Sampling Rate | 48 kHz | |
| Bit Depth | 24 bit | |
| Latency | 58 ms (including signal processing), 22 ms (low-latency mode) | |
| Frequency Response | 160 Hz – 16 kHz (-10 dB) | |
| Maximum Input Level of SPL (0dBFS) | 117.8 dB SPL | |
| Self Noise | -0.8 dBA SPL | |
| SN Ratio (Ref. 94 dB SPL at 1 kHz) | 94.8 dBA | |
| Sensitivity | -23.8 dBFS/Pa | |
| Dynamic Range | 118.6 dBA | |
| Signal Processing | Multi Beam Tracking, Adaptive Echo Canceler, Noise Reduction, Dereverberation, Auto Mixer, Auto Gain Control, Parametric EQ, Output Gain Adjustment | |
External View
Frequency Response
Polar Pattern
