DME Satellite Discontinued

		DME8i-C	DME8o-C	DME4io-C	DME8i-ES	DME8o-ES	DME4io-ES
Size/Weight
Dimensions	Width	480mm	480mm	480mm	480mm	480mm	480mm
	Height	44mm	44mm	44mm	44mm	44mm	44mm
	Depth	361mm	361mm	361mm	361mm	361mm	361mm
Weight	Weight	4.4kg	4.4kg	4.4kg	4.4kg	4.4kg	4.4kg
Power Supply
Power Requirements		AC100-240V, 50/60Hz	AC100-240V, 50/60Hz	AC100-240V, 50/60Hz	AC100-240V, 50/60Hz	AC100-240V, 50/60Hz	AC100-240V, 50/60Hz
Power Consumption		40W	40W	40W	40W	40W	40W

Input characteristics

Input terminal	Gain	Actual load impedance	For use with nominal	Input terminal		Connector
Input terminal	Gain	Actual load impedance	For use with nominal	Nominal	Max. before clip	Connector
CH INPUT 1-8	-60dB	3kohms	50-600 ohm Mics ^* & 600ohm Lines	-60dBu	-40dBu	Euroblock connector
CH INPUT 1-8	+10dBu	3kohms	50-600 ohm Mics ^* & 600ohm Lines	+10dBu	+30dBu	Euroblock connector

* Mic inputs can supply +48V phantom power

Output Characteristics

Output terminal	Impedance	For use with nominal	Output level		Connector
Output terminal	Impedance	For use with nominal	Nominal	Max. before clip	Connector
CH OUTPUT	75ohms	600ohm Lines	+4dBu	+24dBu	Euroblock connector

Control I/O Characteristics

Terminal	Format	Latency	Level	Connector
CobraNet ^*	CobraNet	Fixed: 1.33/2.67/5.33 msec	100Base-TX	RJ-45 x2 (Primary/Secondary)
EtherSound ^**	EtherSound	Calculable: 125μsec (SSI OUT to SSI IN)	100Base-TX	RJ-45 x2 (In/Out)

* DME8i-C, DME8o-C and DME4io-C
** DME8i-ES, DME8o-ES and DME4io-ES

Terminal		Format	Level	Connector
GPI ^*	IN	-	0-5V	Euroblock (3.5mm Pitch)
	OUT	-	TTL
	+V	-	5V
Ethernet		IEEE802.3	10Base-T/100Base-TX	RJ-45
USB		USB1.1	-	Type B
REMOTE		RS232C/RS422	RS232C/RS422	D-sub 9pin (male)

* 8IN / 4OUT
Inputs: Doesn't apply 2 wire Fader mode
Outputs: Imax/pin = 16mA
Outputs: VH = 2.5V(min.), VL = 0.6V(max.)