Analog Input Characteristics
| Input Terminal |
Actual Load Impedance |
For Use with Nominal |
Input Level |
Connector |
|
GAIN |
Sensitivity |
Nominal |
Max. before clip |
| INPUT 1-n * |
-62dB
+10dB |
3kohms |
50-600 ohm Mics & 600ohm Lines |
-82dBu |
-62dBu |
-42dBu |
XLR3-31 type * |
| -10dBu |
+10dBu |
+30dBu |
* LS9-32: n=32, LS9-16: n=16
Analog Output Characteristics
| Output Terminal |
Actual Source Impedance |
For Use with Nominal |
GAIN SW |
Output Level |
Connector |
| Nominal |
Max. before clip |
| OMNI OUT 1-n * |
75ohms |
600ohm Lines |
+24dB **
+18dB |
+4dBu
-2dBu |
+24dBu
+18dBu |
XLR-3-32 type |
| PHONES OUT |
15ohms |
8ohm Phones |
- |
75mW |
150mW |
ST Phone jack |
| 40ohm Phones |
- |
65mW |
150mW |
* LS9-32: n=16, LS9-16: n=8
** Default
Digital Output Characteristics
| Terminal |
Format |
Data Length |
Level |
Connector |
| 2TR IN DIGITAL |
COAXIAL |
IEC60958 |
24bit |
0.5Vpp/
75ohms |
RCA pin jack |
| 2TR OUT DIGITAL |
COAXIAL |
IEC60958
(Consumer Use) |
24bit |
0.5Vpp/
75ohms |
RCA pin jack |
Control I/O Characteristics
| Terminal |
Format |
Level |
Connector |
| NETWORK (Ethernet) |
100Base-T |
- |
RJ45 |
| MIDI |
IN |
MIDI |
- |
DIN-5pin |
| OUT |
MIDI |
- |
DIN-5pin |
| WORD CLOCK |
IN |
- |
TTL/75ohms, Terminated |
BNC |
| OUT |
- |
TTL/75ohms |
BNC |
| LAMP * |
- |
0V-12V |
XLR-4-31 type |
| USB HOST |
USB1.1 |
USB ** |
A type USB Connector |
* Only for LS9-32; 4pin=+12V, 3pin=GND; Max: 5W
** Bus powered hubs are not supported.
